Видео

Thanks for the help!!

Good idea! Nice garage, too.

Just replaced my blower motor. Now I know why...

It's a good idea to wear respiratory protection when dealing with oil mists

Great job Ron

Does the motor oil have any effect on plastics, wires, or rubber under the vehicle?

You sir are awesome!!! Thank you!

This is great! Never thought of a butter knife! Thanks!

Have to try with a 80v Atlas ,

Your tutorial is oK for Beetle 2006-2011. Models before 2006 had different Headlights.

Actual undercoat is wiser to use 💯💯🤝

I'm looking to info on bald clamp can't use the side lever to replace the blade any video on this.

Im

You did not say which way you turned the mixture adjustment.. Alot of people wouldn't know that the engine was running lean and you have to open (counter clockwise) the mix screw.. Most of the time I always start at one and a quarter turns out. To start.. Thanks for the video nice job. Peace man Rolfie

Thank you sir. This helped me save my fathers light. I appreciate you.

good jop sir ✌💪

What if the spring clip in the back is broken off.

Good morning Ron...

Do more bro u great

My fuse keeps blowing

We are having fuel leaking from our carb, do you have an idea why? Right after we replaced it?

you couldn't get a bigger piece of wood

Thanks for the helpful video - I had a similar model (mine had the fabric softener tower that made me use a long extension for the 7/16 socket) and your video certainly helped clarify the process. An alternative to having to tap on the washplate as you're pulling up would be to stick two hooks (clip washer removal tools in the automotive industry), one on each side of the washplate, through the holes and then alternate lifting with each one to raise the washplate off the spline. Worked like a champ for me when I had to replace my basket hub. Just a thought.

Fits a wheel and tire 16in en the Kia forte 2020 (trunk)

a good ole boy tole me never fix that pesky engine oil drip cuz it lubes the undeside of da car and your allways adding fresh oil to the moter . he also kept a candle handy and rubbs it on rust spots on the body car 30=years old and still going

Saved us!!! Thank you so much!

it'd be helpful to know the dia. of the tubing you use. I've watched four videos so far nobody ever mentioned that

thanks Mate...great Vid!!!..very helpful

Awesomeness

Ron, I have same Maytag that doesn't agitate. Removed that hub, but splines not stripped! What else could cause this issue?

Why didn't you check the relay first?

Thanks

nothing here about replacing a carb.

Did not work out for me, the agitator broke and the metal housing didn't budge. Always looks easier than it actually is 😢

I know this video was a long time ago, but hoping to find a solution! I use this vacuum at work and have found out how to do this and clean it out, but I still have trouble picking up certain things like small pieces of grass for example. It spits it back out on me. The bag is brand new, but it seems to not be filling up compared to the part you clean, which does fill up and clog semi-frequently. Is there any more to this vacuum to take apart?

if you buy fake cctv pls do not put in the batteries if i broke in to youre proptey i could tell they are fake like its trying to be in youre face that it is real so fake

Such an informative and helpful video. Made the job so much easier, thanks!

Any tips for removing the bolt on the wash plate? Ours is so tight and the wash plate just keeps spinning which is making it harder. I think my husband has even tried some WD-40

Thanks for the great video, it was very well demonstrated and saved us a lot of time and money. My wife painted the garage door along with the seals and after letting dry over night we tried opening the door. The poor opener opener just stripped the gear and both light covers popped off as it had a major heart failure! But after looking up the price of replacement we noticed the price of the opener has almost doubled. Finding your video and only $44 Can for the part, it is just like new again. Thank you.

Hey man I want to thank u for this. Had this damn thing for 4 years

TY saved me over $10 per vinyl sign by adding my own grommets.❤😊

Mine came with a different kit but your video was a huge help... Thanks a lot!!!!!!!!!!!!

Thanks

Hello there, I have just started the search for information to fix my air compressor Makita AC1300. Your film is the first one that I have come across. Can you help please. The problem I have with my compressor is that it will not restart after it has run low of air. It will start from the beginning with no air in the tank and build up to the required pressure. But once the air as depleted down to a lower level it struggles to restart. It just turns over slowly and does not restart. If the air is completely emptied from the air tank it will then restart. I have had the compressor for some years.!I bought it off eBay and it was only a matter of months old. It was stated that it was an ex display model ??? It may be better if I take a film of what I'm saying is going on with the machine. If I upload it onto RUclips I can then let you know the link. Might be can be for other people to repair their machine with the same problem. Do you think it might be some pressure valve or sensor. Thank you for any help. Kind regards, Daniel King.

Thanks for posting this 👍

I had to replace the blower motor on some other vehicles. The Focus looks VASTLY easier. I've found most repairs on Foci to be pretty easy, with the exception of alternator replacement.

Could the metal rigging be recycled as chainlink fence? Or would it rust away?

Great toy Except for the spikes on top. A toddler could easily lose an eye to those. They add nothing so just leave them off.

Hey Ron. Is that machine for sale? Where can I find one. Thanks

This video was great in helping me fix my broken belt.